torque
eace0bf8db
the readme is a ramble and there's no functionality (yet). couldn't ask for a better start.
1.3 KiB
Yaesu Rotator Driver Shim
The Yaesu G-5500DC rotator is a nice piece of hardware, but it has an analog (0-5 V) control interface and requires a separate GS-232B box for computer serial control (which will run you a nice $600 for a new unit). Someone used to sell an adapter board for the Labjack U12 (which basically consists of a DIN-8 jack, a darlington transistor array, and a few resistors + LEDs), which provides precise computer control of the G-5500DC at a much lower cost.
However, the Labjack U12 is just basic 12-bit data acquisition device that is not specifically made for controlling a rotator, so common satellite tracking software (e.g. hamlib) does not support it as a Yaesu rotator interface.
Fortunately, labjack provides an open-source libusb-based driver for the Labjack U12, which makes it eminently possible to expose this hardware stack as controllable through the hamlib protocol (or, more precisely, a simulacrum thereof).
Implementation
I mostly just want this to run on Linux, as a static executable. The zig build system is good.
Dependencies are fully vendored.
Status
Build with zig 0.13.
It builds for Linux and macOS. It does not currently build for Windows due to ljacklm having a dependency on pthreads (specifically, it uses mutexes).