build: disable libusb logging by default

It is quite verbose and not very useful.

readme.md

@@ -24,7 +24,7 @@ Unfortunately, all platforms have additional steps that must be taken (some easi
 
 #### Windows
 
-This compiles for, and runs on, Windows. However, in order for it to work out of the box, it has to link against the (proprietary) Windows LabJack U12 driver instead of the open source libUSB driver. This has two main limitations: the Windows driver is only available for the `x86` and `x86-64` architectures, and it is exclusively distributed as a dynamic library, meaning that `yaes.exe` must be distributed alongside `ljackuw.dll`. When building for Windows targets, the appropriate library file will be copied to the binary installation directory (`zig-out/bin` by default).
+This compiles for, and runs on, Windows. However, the Labjack U12 by default gets assigned the Windows USB HID driver, which causes the USB report descriptor control transfer read to get mangled for mystery reasons that presumably made sense to some egghead at Microsoft at some point in time. Fortunately, this can be relatively easily fixed by using a tool like [zadig] to set the Labjack U12 to use the WinUSB driver instead of the HID driver. This is not an endorsement of the above outlined process, but rather an explanation for persons either foolish or desperate.
 
 #### macOS
 
@@ -33,3 +33,5 @@ This works on macOS, though it has to be run with `sudo`, as access to the USB h
 #### Linux
 
 You probably need to install the included udev rules file in order for the USB device to be accessible as a user. This is buried in the source tree as `deps/labjack/exodriver/90-labjack.rules`. These should probably go in `/etc/udev/rules.d` if you are installing them manually and I have properly understood the various Linux folder conventions.
+
+[zadig]: https://zadig.akeo.ie

src/Config.zig

@@ -92,7 +92,6 @@ pub fn validate(self: Config, err_writer: anytype) !void {
 rotctl: RotControlConfig = .{
     .listen_address = "127.0.0.1",
     .listen_port = 4533,
-    .autopark = false,
 },
 labjack: LabjackConfig = .{
     .device = .autodetect,
@@ -128,7 +127,6 @@ controller: ControllerConfig = .{
     // this is a symmetric mask, so the minimum usable elevation is elevation_mask deg
     // and the maximum usable elevation is 180 - elevation_mask deg
     .elevation_mask = 0.0,
-    .feedback_window_samples = 3,
 },
 
 pub const VoltAngle = struct { voltage: f64, angle: f64 };
@@ -152,7 +150,6 @@ pub const MinMax = struct {
 const RotControlConfig = struct {
     listen_address: []const u8,
     listen_port: u16,
-    autopark: bool,
 };
 
 const LabjackConfig = struct {
@@ -182,8 +179,6 @@ const ControllerConfig = struct {
     angle_offset: AzEl,
     elevation_mask: f64,
 
-    feedback_window_samples: u8,
-
     const OutPair = struct {
         increase: lj.DigitalOutputChannel,
         decrease: lj.DigitalOutputChannel,

src/RotCtl.zig

@@ -10,9 +10,12 @@ const log = std.log.scoped(.RotCtl);
 
 writer: std.io.BufferedWriter(512, std.net.Stream.Writer),
 running: bool,
-rotator: *YaesuController,
+rotator: YaesuController,
 
 pub fn run(allocator: std.mem.Allocator) !void {
+    // var server = std.net.StreamServer.init(.{ .reuse_address = true });
+    // defer server.deinit();
+
     const listen_addr = try std.net.Address.parseIp(
         config.rotctl.listen_address,
         config.rotctl.listen_port,
@@ -27,19 +30,20 @@ pub fn run(allocator: std.mem.Allocator) !void {
     var interface: RotCtl = .{
         .writer = undefined,
         .running = true,
-        .rotator = try YaesuController.create(allocator),
+        .rotator = try YaesuController.init(allocator),
     };
 
-    while (interface.running) {
+    while (true) {
         const client = try server.accept();
         defer {
             log.info("disconnecting client", .{});
-            if (!config.rotctl.autopark)
+            interface.rotator.stop();
-                interface.rotator.stop();
             client.stream.close();
         }
 
         interface.writer = .{ .unbuffered_writer = client.stream.writer() };
+        interface.running = true;
+        defer interface.running = false;
 
         log.info("client connected from {}", .{client.address});
 
@@ -56,13 +60,7 @@ pub fn run(allocator: std.mem.Allocator) !void {
                 std.mem.trim(u8, fbs.getWritten(), &std.ascii.whitespace),
             ) catch break;
         }
-
-        // loop ended due to client disconnect
-        if (interface.running and config.rotctl.autopark)
-            interface.rotator.startPark();
     }
-
-    interface.rotator.control_thread.join();
 }
 
 fn write(self: *RotCtl, buf: []const u8) !void {
@@ -174,6 +172,7 @@ fn handleHamlibCommand(
     if (first.len == 1 or first[0] == '\\') {
         switch (first[0]) {
             // NOTE: this is not technically supported by rotctld.
+            'q', 'Q' => try self.quit(first, &tokens),
             'S' => try self.stop(first, &tokens),
             'K' => try self.park(first, &tokens),
             'p' => try self.getPosition(first, &tokens),
@@ -244,8 +243,8 @@ const HamlibCommand = struct {
 };
 
 const rotctl_commands = [_]HamlibCommand{
-    .{ .long = "quit", .callback = quit },
+    .{ .short = 'q', .callback = quit }, // quit
-    .{ .long = "exit", .callback = quit },
+    .{ .short = 'Q', .callback = quit }, // quit
     .{ .long = "AOS", .callback = blindAck },
     .{ .long = "LOS", .callback = blindAck },
     .{ .short = 'P', .long = "set_pos", .callback = setPosition }, // azimuth: f64, elevation: f64

src/YaesuController.zig

@@ -8,8 +8,6 @@ const log = std.log.scoped(.yaesu_controller);
 
 const YaesuController = @This();
 
-pub var singleton: ?*YaesuController = null;
-
 control_thread: std.Thread,
 lock: *std.Thread.Mutex,
 controller: *const Controller,
@@ -25,7 +23,7 @@ pub const CalibrationRoutine = enum {
 };
 
 pub fn calibrate(allocator: std.mem.Allocator, routine: CalibrationRoutine) !void {
-    const controller = try YaesuController.create(allocator);
+    const controller = try YaesuController.init(allocator);
     defer {
         controller.quit();
         controller.control_thread.join();
@@ -37,29 +35,22 @@ pub fn calibrate(allocator: std.mem.Allocator, routine: CalibrationRoutine) !voi
     }
 }
 
-pub fn create(allocator: std.mem.Allocator) !*YaesuController {
+pub fn init(allocator: std.mem.Allocator) !YaesuController {
-    if (singleton) |_| {
+    const lock = try allocator.create(std.Thread.Mutex);
-        log.err("Controller singleton already exists.", .{});
+    errdefer allocator.destroy(lock);
-        return error.AlreadyInitialized;
+    lock.* = .{};
-    }
 
     const controller = try allocator.create(Controller);
     errdefer allocator.destroy(controller);
-    controller.* = try Controller.init(allocator);
+    controller.init(lock);
-    errdefer controller.deinit(allocator);
     // do this in the main thread so we can throw the error about it synchronously.
     try controller.connectLabjack();
 
-    const self = try allocator.create(YaesuController);
+    return .{
-    errdefer allocator.destroy(self);
-    self.* = .{
         .control_thread = try std.Thread.spawn(.{}, runController, .{controller}),
-        .lock = &controller.lock,
+        .lock = lock,
         .controller = controller,
     };
-
-    singleton = self;
-    return self;
 }
 
 fn inRange(request: f64, comptime dof: enum { azimuth, elevation }) bool {
@@ -100,7 +91,7 @@ pub fn setTarget(self: YaesuController, target: AzEl) error{OutOfRange}!void {
 
     const controller = @constCast(self.controller);
     controller.target = masked_target;
-    controller.requestState(.running);
+    controller.requested_state = .running;
 }
 
 pub fn currentPosition(self: YaesuController) AzEl {
@@ -110,15 +101,16 @@ pub fn currentPosition(self: YaesuController) AzEl {
     return self.controller.position;
 }
 
-pub fn waitForUpdate(self: YaesuController) AzEl {
+pub fn startCalibration(self: YaesuController) void {
-    const controller = @constCast(self.controller);
+    // there are two different types of calibration:
-
+    // 1. feedback calibration, running to the extents of the rotator
-    self.lock.lock();
+    // 2. sun calibration, which determines the azimuth and elevation angle
-    defer self.lock.unlock();
+    //    offset between the rotator's physical stops and geodetic north
-
+    //
-    controller.condition.wait(self.lock);
+    // The former is (fairly) trivial to automate, just run until stall
-
+    // (assuming there's no deadband in the feedback). The latter requires
-    return controller.position;
+    // manual input as the human is the feedback hardware in the loop.
+    _ = self;
 }
 
 pub fn quit(self: YaesuController) void {
@@ -126,7 +118,7 @@ pub fn quit(self: YaesuController) void {
     defer self.lock.unlock();
 
     const controller = @constCast(self.controller);
-    controller.requestState(.stopped);
+    controller.requested_state = .stopped;
 }
 
 pub fn stop(self: YaesuController) void {
@@ -135,7 +127,7 @@ pub fn stop(self: YaesuController) void {
 
     const controller = @constCast(self.controller);
     controller.target = controller.position;
-    controller.requestState(.idle);
+    controller.requested_state = .idle;
 }
 
 pub fn startPark(self: YaesuController) void {
@@ -163,77 +155,16 @@ fn runController(controller: *Controller) void {
     };
 }
 
-const FeedbackBuffer = struct {
-    samples: []f64,
-    index: usize = 0,
-
-    fn initZero(allocator: std.mem.Allocator, samples: usize) !FeedbackBuffer {
-        const buf = try allocator.alloc(f64, samples * 2);
-        @memset(buf, 0);
-        return .{ .samples = buf };
-    }
-
-    fn deinit(self: FeedbackBuffer, allocator: std.mem.Allocator) void {
-        allocator.free(self.samples);
-    }
-
-    fn push(self: *FeedbackBuffer, sample: [2]lj.AnalogReadResult) void {
-        const halfpoint = @divExact(self.samples.len, 2);
-        defer self.index = (self.index + 1) % halfpoint;
-
-        self.samples[self.index] = sample[0].voltage;
-        self.samples[self.index + halfpoint] = sample[1].voltage;
-    }
-
-    inline fn mean(data: []f64) f64 {
-        var accum: f64 = 0;
-        for (data) |pt| {
-            accum += pt;
-        }
-        return accum / @as(f64, @floatFromInt(data.len));
-    }
-
-    fn lerp(input: f64, cal_points: Config.MinMax) f64 {
-        return (input - cal_points.minimum.voltage) * cal_points.slope() + cal_points.minimum.angle;
-    }
-
-    fn get(self: FeedbackBuffer) AzEl {
-        const halfpoint = @divExact(self.samples.len, 2);
-
-        return .{
-            .azimuth = lerp(
-                mean(self.samples[0..halfpoint]),
-                config.labjack.feedback_calibration.azimuth,
-            ) + config.controller.angle_offset.azimuth,
-            .elevation = lerp(
-                mean(self.samples[halfpoint..]),
-                config.labjack.feedback_calibration.elevation,
-            ) + config.controller.angle_offset.elevation,
-        };
-    }
-
-    fn getRaw(self: FeedbackBuffer) AzEl {
-        const halfpoint = @divExact(self.samples.len, 2);
-        return .{
-            .azimuth = mean(self.samples[0..halfpoint]),
-            .elevation = mean(self.samples[halfpoint..]),
-        };
-    }
-};
-
 const Controller = struct {
     target: AzEl,
     position: AzEl,
-    feedback_buffer: FeedbackBuffer,
 
     current_state: ControllerState,
     requested_state: ControllerState,
 
+    lock: *std.Thread.Mutex,
     labjack: lj.Labjack,
 
-    lock: std.Thread.Mutex = .{},
-    condition: std.Thread.Condition = .{},
-
     const ControllerState = enum {
         initializing,
         idle,
@@ -242,13 +173,13 @@ const Controller = struct {
         stopped,
     };
 
-    fn init(allocator: std.mem.Allocator) !Controller {
+    fn init(self: *Controller, lock: *std.Thread.Mutex) void {
-        return .{
+        self.* = .{
             .target = .{ .azimuth = 0, .elevation = 0 },
             .position = .{ .azimuth = 0, .elevation = 0 },
-            .feedback_buffer = try FeedbackBuffer.initZero(allocator, config.controller.feedback_window_samples),
             .current_state = .stopped,
             .requested_state = .idle,
+            .lock = lock,
             .labjack = switch (config.labjack.device) {
                 .autodetect => lj.Labjack.autodetect(),
                 .serial_number => |sn| lj.Labjack.with_serial_number(sn),
@@ -256,28 +187,12 @@ const Controller = struct {
         };
     }
 
-    fn deinit(self: Controller, allocator: std.mem.Allocator) void {
-        self.feedback_buffer.deinit(allocator);
-    }
-
     fn connectLabjack(self: *Controller) !void {
         const info = try self.labjack.connect();
         try self.labjack.setAllDigitalOutputLow();
         self.labjack.id = info.local_id;
     }
 
-    // this function is run with the lock already acquired
-    fn propagateState(self: *Controller) void {
-        if (self.current_state == .stopped) return;
-        self.current_state = self.requested_state;
-    }
-
-    // this function is run with the lock already acquired
-    fn requestState(self: *Controller, request: ControllerState) void {
-        if (self.current_state == .stopped) return;
-        self.requested_state = request;
-    }
-
     fn lerpOne(input: f64, cal_points: Config.MinMax) f64 {
         return (input - cal_points.minimum.voltage) * cal_points.slope() + cal_points.minimum.angle;
     }
@@ -300,10 +215,10 @@ const Controller = struct {
         zero,
         positive,
 
-        pub fn symbol(self: Sign) u21 {
+        pub fn symbol(self: Sign) u8 {
             return switch (self) {
                 .negative => '-',
-                .zero => '×',
+                .zero => '=',
                 .positive => '+',
             };
         }
@@ -318,23 +233,26 @@ const Controller = struct {
             .positive;
     }
 
-    fn updateFeedback(self: *Controller) !void {
+    fn updateAzEl(self: *const Controller) !AzEl {
-        const inputs = .{
+        const inputs = .{ config.controller.azimuth_input, config.controller.elevation_input };
-            config.controller.azimuth_input,
-            config.controller.elevation_input,
-        };
 
         const raw = try self.labjack.readAnalogWriteDigital(
             2,
             inputs,
-            null,
+            .{false} ** 4,
             true,
         );
 
-        self.feedback_buffer.push(raw);
+        return lerpAndOffsetAngles(raw);
     }
 
-    fn drive(self: *const Controller, pos_error: AzEl) !void {
+    fn drive(self: *const Controller, pos_error: AzEl) !AzEl {
+        // NOTE: feedback will be roughly config.controller.loop_interval_ns out of
+        //       date. For high loop rates, this shouldn't be an issue.
+
+        const inputs = .{ config.controller.azimuth_input, config.controller.elevation_input };
+        var drive_signal: [4]bool = .{false} ** 4;
+
         const azsign = signDeadzone(
             pos_error.azimuth,
             config.controller.angle_tolerance.azimuth,
@@ -345,111 +263,107 @@ const Controller = struct {
             config.controller.angle_tolerance.elevation,
         );
 
-        var drive_signal: [4]bool = .{false} ** 4;
         drive_signal[config.controller.azimuth_outputs.increase.io] = azsign == .positive;
         drive_signal[config.controller.azimuth_outputs.decrease.io] = azsign == .negative;
         drive_signal[config.controller.elevation_outputs.increase.io] = elsign == .positive;
         drive_signal[config.controller.elevation_outputs.decrease.io] = elsign == .negative;
 
-        const raw = self.feedback_buffer.getRaw();
+        const raw = try self.labjack.readAnalogWriteDigital(2, inputs, drive_signal, true);
+        const angles = lerpAndOffsetAngles(raw);
 
         log.info(
-            // -180.1 is 6 chars. -5.20 is 5 chars
+            "az: {d:.1}° ({d:.2} V) {d:.1}° => {c}, el: {d:.1}° ({d:.2} V) {d:.1}° => {c}",
-            "az: {d: >6.1}° ({d: >5.2} V) Δ {d: >6.1}° => {u}, el: {d: >6.1}° ({d: >5.2} V) Δ {d: >6.1}° => {u}",
             .{
-                self.position.azimuth,
+                angles.azimuth,
-                raw.azimuth,
+                raw[0].voltage,
                 pos_error.azimuth,
                 azsign.symbol(),
-                self.position.elevation,
+                angles.elevation,
-                raw.elevation,
+                raw[1].voltage,
                 pos_error.elevation,
                 elsign.symbol(),
             },
         );
-
+        return angles;
-        try self.labjack.writeIoLines(drive_signal);
-    }
-
-    fn setPosition(self: *Controller, position: AzEl) void {
-        self.position = position;
-        self.condition.broadcast();
     }
 
     fn run(self: *Controller) !void {
         self.current_state = .initializing;
 
-        var timer = LoopTimer.init(config.controller.loop_interval_ns);
+        var timer: LoopTimer = .{ .interval_ns = config.controller.loop_interval_ns };
 
-        while (timer.mark()) : (timer.sleep()) {
+        while (timer.mark()) : (timer.sleep()) switch (self.current_state) {
-            const fbfail = if (self.updateFeedback()) |_| false else |_| true;
+            .initializing, .idle => {
-
+                const pos = self.updateAzEl() catch {
-            {
-                self.lock.lock();
-                defer self.lock.unlock();
-
-                self.setPosition(self.feedback_buffer.get());
-                if (fbfail) self.requestState(.stopped);
-                self.propagateState();
-            }
-
-            switch (self.current_state) {
-                .initializing, .idle => {},
-                .calibration => {
                     self.lock.lock();
                     defer self.lock.unlock();
 
-                    // run calibration routine. psych, this does nothing. gottem
+                    self.current_state = .stopped;
-                    self.current_state = .idle;
+                    continue;
-                    self.requestState(.idle);
+                };
-                },
-                .running => {
-                    const pos_error: AzEl = blk: {
-                        self.lock.lock();
-                        defer self.lock.unlock();
 
-                        break :blk .{
+                self.lock.lock();
-                            .azimuth = self.target.azimuth - self.position.azimuth,
+                defer self.lock.unlock();
-                            .elevation = self.target.elevation - self.position.elevation,
+
-                        };
+                self.position = pos;
+                self.current_state = self.requested_state;
+            },
+            .calibration => {
+                self.lock.lock();
+                defer self.lock.unlock();
+
+                // run calibration routine. psych, this does nothing. gottem
+                self.current_state = .idle;
+                self.requested_state = self.current_state;
+            },
+            .running => {
+                const pos_error: AzEl = blk: {
+                    self.lock.lock();
+                    defer self.lock.unlock();
+
+                    break :blk .{
+                        .azimuth = self.target.azimuth - self.position.azimuth,
+                        .elevation = self.target.elevation - self.position.elevation,
                     };
+                };
 
-                    self.drive(pos_error) catch {
+                const pos = self.drive(pos_error) catch {
-                        self.lock.lock();
+                    self.lock.lock();
-                        defer self.lock.unlock();
+                    defer self.lock.unlock();
 
-                        self.current_state = .stopped;
+                    self.current_state = .stopped;
-                        continue;
+                    continue;
-                    };
+                };
-                },
+
-                .stopped => {
+                self.lock.lock();
-                    // attempt to reset the drive outputs
+                defer self.lock.unlock();
-                    try self.labjack.writeIoLines(.{false} ** 4);
+
-                    break;
+                self.position = pos;
-                },
+                self.current_state = self.requested_state;
-            }
+            },
-        }
+            .stopped => {
+                // attempt to reset the drive outputs
+                _ = self.updateAzEl() catch {};
+                break;
+            },
+        };
     }
 };
 
 pub const LoopTimer = struct {
     interval_ns: u64,
-    timer: std.time.Timer,
 
-    pub fn init(interval_ns: u64) LoopTimer {
+    start: i128 = 0,
-        return .{
-            .interval_ns = interval_ns,
-            .timer = std.time.Timer.start() catch @panic("Could not create timer"),
-        };
-    }
 
     pub fn mark(self: *LoopTimer) bool {
-        self.timer.reset();
+        self.start = std.time.nanoTimestamp();
         return true;
     }
 
     pub fn sleep(self: *LoopTimer) void {
-        const elapsed = self.timer.read();
+        const now = std.time.nanoTimestamp();
-        std.time.sleep(self.interval_ns -| elapsed);
+        const elapsed: u64 = @intCast(now - self.start);
+
+        std.time.sleep(self.interval_ns - elapsed);
     }
 };

src/labjack.zig

@@ -68,30 +68,6 @@ pub const Labjack = struct {
             return status.toError();
     }
 
-    pub fn writeIoLines(self: Labjack, out: [4]bool) LabjackError!void {
-        var id = self.cId();
-
-        var d_modes: c_long = 0xFF_FF;
-        var d_outputs: c_long = 0;
-        var d_states: c_long = 0;
-        const io_modes: c_long = 0b1111;
-        var io_outputs: c_long = PackedOutput.fromBoolArray(out).toCLong();
-
-        const status = c_api.DigitalIO(
-            &id,
-            self.demo(),
-            &d_modes,
-            io_modes,
-            &d_outputs,
-            &io_outputs,
-            1, // actually update the pin modes
-            &d_states,
-        );
-
-        if (!status.okay())
-            return status.toError();
-    }
-
     /// Read one analog input channel, either single-ended or differential
     pub fn analogReadOne(self: Labjack, input: AnalogInput) LabjackError!AnalogReadResult {
         if (!input.channel.isDifferential() and input.gain_index != 0) {

src/main.zig

@@ -1,5 +1,4 @@
 const std = @import("std");
-const builtin = @import("builtin");
 
 const Config = @import("./Config.zig");
 const lj = @import("./labjack.zig");
@@ -10,72 +9,11 @@ const udev = @import("udev_rules");
 
 const log = std.log.scoped(.main);
 
-fn quit() noreturn {
-    if (YaesuController.singleton) |controller| {
-        controller.quit();
-        controller.control_thread.join();
-    }
-    std.process.exit(1);
-}
-
-const moreposix = struct {
-    pub extern "c" fn sigaddset(set: *std.posix.sigset_t, signo: c_int) c_int;
-    pub extern "c" fn sigdelset(set: *std.posix.sigset_t, signo: c_int) c_int;
-    pub extern "c" fn sigemptyset(set: *std.posix.sigset_t) c_int;
-    pub extern "c" fn sigfillset(set: *std.posix.sigset_t) c_int;
-    pub extern "c" fn sigismember(set: *const std.posix.sigset_t, signo: c_int) c_int;
-    // stdlib prototype is wrong, it doesn't take optional pointers.
-    pub extern "c" fn pthread_sigmask(how: c_int, noalias set: ?*const std.posix.sigset_t, noalias oldset: ?*std.posix.sigset_t) c_int;
-};
-
-const psigs = [_]c_int{ std.posix.SIG.INT, std.posix.SIG.HUP, std.posix.SIG.QUIT };
-
-fn posixSignalHandlerThread() void {
-    var set: std.posix.sigset_t = undefined;
-    _ = moreposix.sigemptyset(&set);
-    for (psigs) |sig|
-        _ = moreposix.sigaddset(&set, sig);
-
-    var sig: c_int = 0;
-    _ = std.posix.system.sigwait(&set, &sig);
-    log.info("Got exit signal", .{});
-    quit();
-}
-
-// Windows runs this handler in a thread, so calling quit directly should be safe.
-fn windowsEventHandler(code: std.os.windows.DWORD) callconv(std.os.windows.WINAPI) std.os.windows.BOOL {
-    _ = code;
-    log.info("Got exit signal", .{});
-    quit();
-}
-
-fn addExitHandler() !void {
-    if (comptime builtin.os.tag == .windows) {
-        try std.os.windows.SetConsoleCtrlHandler(windowsEventHandler, true);
-    } else if (comptime std.Thread.use_pthreads) {
-        var set: std.posix.sigset_t = undefined;
-        _ = moreposix.sigemptyset(&set);
-        for (psigs) |sig|
-            _ = moreposix.sigaddset(&set, sig);
-
-        _ = moreposix.pthread_sigmask(std.posix.SIG.BLOCK, &set, null);
-        // nobody cares about the thread
-        _ = try std.Thread.spawn(.{}, posixSignalHandlerThread, .{});
-    } else {
-        log.err("not windows and not pthreads = disaster", .{});
-    }
-}
-
 fn printStderr(comptime fmt: []const u8, args: anytype) void {
     std.debug.print(fmt ++ "\n", args);
 }
 
 pub fn main() !u8 {
-    if (comptime builtin.os.tag == .windows) {
-        // set output to UTF-8 on Windows
-        _ = std.os.windows.kernel32.SetConsoleOutputCP(65001);
-    }
-
     var gpa = std.heap.GeneralPurposeAllocator(.{}){};
     defer _ = gpa.deinit();
     const allocator = gpa.allocator();
@@ -122,14 +60,9 @@ pub fn main() !u8 {
 
         defer Config.deinit();
 
-        addExitHandler() catch {
-            log.err("Could not install quit handler.", .{});
-            return 1;
-        };
-
         RotCtl.run(allocator) catch |err| {
             log.err("rotator controller ceased unexpectedly! {s}", .{@errorName(err)});
-            quit();
+            return 1;
         };
     } else if (std.mem.eql(u8, args[1], commands.calibrate)) {
         if (args.len < 3 or args.len > 4) {
@@ -147,14 +80,9 @@ pub fn main() !u8 {
             return 1;
         };
 
-        addExitHandler() catch {
-            log.err("Could not install quit handler.", .{});
-            return 1;
-        };
-
         YaesuController.calibrate(allocator, routine) catch |err| {
             log.err("Calibration failed: {s}", .{@errorName(err)});
-            quit();
+            return 1;
         };
     } else if (std.mem.eql(u8, args[1], commands.help)) {
         if (args.len != 3) {